HP ENVY 4520 CONNECT TO WIFI
- The HP envy 4520 is an all in one printer with high quality and borderless printing. Price is also quite reasonable. Also prints through the cloud. Prints fast and high quality photo printing. It is easy to set up the HP envy 4520 printer. So follow the below steps for HP envy 4520 Wifi connection.
- First, click the Wifi direct icon on the printer’s control panel to open the status screen.
- Then, touch the settings icon to alter the connection type to either protected or unprotected i.e Manual or Automatic
- Also you can print a report containing information about wifi Direct.
- Press the information button on the access panel to print the report. Then, write down the Wifi direct password and other settings.
- Now link the HP envy 4520 printer to the computer or mobile device. Then print the network information page along with the IP address from the printer.
- Next, open the web browser and type the SSID in the address box. Then wait for a few seconds after that embedded web server page pops up.
- Now click continue on the website security certificate page that appears next.
- Open the networks menu and select the wifi direct icon. Then, select the status option and wait until you see a message stating “you are being redirected to a secure HTTPS enabled page”. After that wait for a few seconds. Now click OK to redirect to an HTTPS page.
- Suppose an error message stating “Your connection is not private displays, expand the Advanced menu and select proceed to print IP address option. ● Then, select the Edit settings menu on the next page.
- Now refer to the manual to make necessary changes and click Apply.
- Restart the HP envy 4520 printer and initiate the wifi direct password and then you can initiate a print or copy.
HP ENVY 4520 DRIVER DOWNLOAD AND INSTALLATION
- First, make sure to download the latest version of the printer driver. The latest drivers are available in support.hp.com.
- ThThen, visit the website to download and install the software and driver.
- After that, enter your model number in the search space of the web page.
- Next, click the software and drivers tab on the left side of the webpage and click “go visit the software download page”. You can either download the full feature software or basic driver according to your choice.
- The web page itself will check the operating system. After that, download and double click the driver file in the browser download bar.
- Or in the Downloads folder on the computer to launch the driver installation
- Then, follow the on screen instructions to complete the connection setup and driver installation
- Finally, complete the printer registration and activation by returning to the HP home page in your web browser.
HP ENVY 4520 PRINTER SETUP
- UNBOX THE PRINTER-First, remove the printer box by removing tapes and stickers. Then, keep it on a flat surface to proceed. Next, take off all the packaging material from the accessories. Now unpack the printer accessories and finish the unboxing process for the HP envy 4520 setup.
- CONNECT THE POWER CORD TO HP ENVY 4520 PRINTER-First, insert one end of the cord to the printer and the other end to the power socket. Then, verify the stable power connection. After that, switch on the printer after basic HP envy 4520 setup. Finally, wait for the printer to power on.
- INSTALLATION OF INK CARTRIDGES-First, turn on your printer and open the access door. Then, clean the access area and unwrap the new HP ink cartridges. Next, remove the plastic wrappings from the cartridge and insert. Locate according to the color-coding and close the access door. Finally, assign a print task and get b/w and color printouts easily.
- LOAD PAPER ON TRAY FOR HP Deskjet ENVY 4520-First, turn on your HP envy 4520 printer and lift the input paper tray. Then, clear all the paper clots and remove all the protective materials. Clean the print heads and stuff the printing sheets into them. Look for damaged edges of printing sheets and remove them. Finally, close the input paper tray and continue printing files at ease.
HP ENVY 4520 SETUP
- First, keep the HP envy 4520 printer and computer close to each other.
- Then take a USB cable of length not more than 10 inches.
- Plug one end of the USB to the printer and the other end to the computer.
- Make sure that you have installed the latest version of the printer driver.
- Finally, a notification pops up stating that the HP envy 4520 wireless setup connection is successful.
HP ENVY 4500 WIRELESS SETUP
- First, check Wifi direct settings and take note of the same.
- Then, select the HP envy 4520 wireless setup wizard option to activate the Wifi
- After that, a list of networks available within the printer’s wifi range appears.
- Activate the router that is connected to an Internet Service Provider
- Then, confirm that the internet connection on the ISP is active. After that, test the internet connection speed and signal strength.
- Now deactivate all the other wireless networks within the printer’s range.
- If the auto connect mode is active, the printer connects automatically.
- Then, the printer displays a notification stating that the connection is successful.
- The wireless setup light on the printer turns from orange to blue.
- Also you can use the Bluetooth method for connection. For Bluetooth method make sure to keep the printer and the smartphone close
HP ENVY 4520 WIRELESS SETUP IN WINDOWS
- First, place the printer close to the computer. Then perform steps to connect the printer to the wireless network.
- Two options provided- 1. HP Auto Wireless Connect 2. The printer network connection
- For HP Auto Wireless connect first select yes-access my router-Next
- Finally, follow the on screen instructions to complete Wireless network setup for the HP envy 4520
-
For “Printer Network Screen” two methods are available
1. If the IP address is unknown Select Not connected-Wireless Off-Next.
2. If you know the HP envy 4520 printer’s IP address. First, select connected then enter the IP Address and click Next.
3. Then follow the on screen instructions to complete the Wireless Network Setup HP envy 4520 printer. - Now deactivate all the other wireless networks within the printer’s range.
- If the auto connect mode is active, the printer connects automatically.
- Then, the printer displays a notification stating that the connection is successful.
- The wireless setup light on the printer turns from orange to blue.
- Also you can use the Bluetooth method for connection. For Bluetooth method make sure to keep the printer and the smartphone close
HP ENVY 4520 WIRELESS SETUP IN MAC
- First, keep the printer close to the computer. After that perform steps to connect the printer to the wireless network.
- Two options provided- 1. HP Auto Wireless Connect(Initial Setup) 2. Wireless setup using a USB connection
- For HP Auto Wireless Connect, first select HP envy 4520 and click Continue.
- Then, follow the on screen instructions to complete the wireless network setup printer.
- For Wireless setup using USB connection. First, connect the USB cable to your HP envy 4520 printer.
- Then, select the printer and click continue. After that follow the on screen instructions to complete Wireless network setup for HP envy 4520 printer.
So follow the above mentioned steps for HP envy 4520 printer setup. We made it in simple points for your easy understanding. We hope it was helpful for you.
