HP Envy 6055 Setup

UNBOX THE PRINTER-First, remove the printer box by removing tapes and stickers. Then, keep it on a flat surface to proceed. Next, take off all the packaging material from the accessories. Now unpack the printer accessories and finish the unboxing process for the HP envy 6055 setup.
CONNECT THE POWER CORD TO HP ENVY 6055 PRINTER-First, insert one end of the cord to the printer and the other end to the power socket. Then, verify the stable power connection. After that, switch on the printer after basic HP envy 6055 setup. Finally, wait for the printer to power on.
INSTALLATION OF INK CARTRIDGES-First, turn on your printer and open the access door. Then, clean the access area and unwrap the new HP ink cartridges. Next, remove the plastic wrappings from the cartridge and insert. Locate according to the color-coding and close the access door. Finally, assign a print task and get b/w and color printouts easily.
LOAD PAPER ON TRAY FOR HP ENVY 6055-First, turn on your HP envy 6055 printer and lift the input paper tray. Then, clear all the paper clots and remove all the protective materials. Clean the print heads and stuff the printing sheets into them. Look for damaged edges of printing sheets and remove them. Finally, close the input paper tray and continue printing files at ease.

First, turn on the printer and go to the browser then search 123.hp.com/envy6032.
Then choose the latest Software and Drivers in the menu bar.
After that, double-click on the downloaded driver file and initialize the installation process. Then, extract the driver file if it is in the .zip format.
Go through the on screen instructions. After that, enable the checkbox of terms and conditions.
Configure the connection between your printer and computer.
Actually the installation process varies depending on the operating system version of your computer or laptop.

First, power up the router and make sure the printer provides an active internet connection. Then, link the printer to the network of the router.
After that, the wireless connection between your HP Envy 6055 Setup printer and computer is done using the HP Smart application.
You can get the app from the Microsoft Store for Windows OS and Apple Store for Mac devices.
Then, download and launch the HP Smart application.
Open the application and add your printer.
Now you can perform all the functions of the printer.

First touch and hold the Information button until the other control panel buttons light turns up.
Then subsequently, touch the Information and Cancel buttons simultaneously to print the page.
Now, touch the Information, Cancel, and Resume buttons together to turn on Wi- Fi Direct on your printer.
Next, visit the Wi-Fi settings on your computer and then choose your printer named HP=Setup<93_Envy 6055 series.
Finally, visit Printing with Wi-Fi Direct and set up the printer.

First, to prepare for installation power on your printer and then place it in setup mode.
Now, press ‘CANCEL’ and the ‘WIRELESS’ button to wake up the printer.
Then, on the LCD display, navigate to wireless or network settings and select ‘Restore’ Network Settings.
Your computer and the HP envy 6055 printer must be in connection to the same wireless network.
To install the printer software open the web browser then go to the printer setup and click Download to save HP Easy start.
After that, open the saved file and extract the software.
When prompt display, select continue to make changes to your computer.
If the HP envy 6055 wireless printer is not detected, select ‘MY PRINTER’ is not shown.
Follow the instructions to get the software selection screen and select the software.

If the HP envy 6055 is connected to a wireless network, make sure it is a good internet connection.

First, to prepare for installation the router and computer must be switched on.
Printer should be ready with paper in the input tray and ink in the ink cartridge.
Also disconnect the USB cables if any are connected to it.
Finally, the printer must be ‘ON’.
The router and the computer must be close to each other for better accessibility.
To restore default wireless settings on the printer wake the printer by pressing the power button for stability.
Suppose the wireless light is not blinking, press the ‘Wireless’ and ‘cancel’ button simultaneously for a few seconds.
Now, proceed by continuing to install the software.
Using HP auto wireless Complete the software setup.
To install the printer software navigate to the setup page and click download and then open HP Easy Start.
Then, click the Set Up My HP option and click Accept.
After that, on the printer control panel, check for the light. Then, under the connect screen select your HP envy 6055 printer and click Continue.
Now, type the required details and select the Join option.
HP Easy Start requests access to the network and click Allow.
Finally, click Add printer to create the queue to start printing.

First, switch on your printer. Then find the WPS button present on your router, but don't press it.
Suppose your router is not incompatible with WPS, follow the below steps for connecting the printer using the HP Smart app.
Press and hold the Wireless button at the backside of the printer. At the same time, press the Power button for a few seconds.
Step Now, on the router, press and hold the WPS button for a couple of seconds or until you note that the WPS connection process has initiated.
The router and the computer must be close to each other for better accessibility.
So follow the above mentioned steps for HP envy 6055 printer setup. We made it in simple points for your easy understanding. We hope it was helpful for you. For more queries contact us.