HP ENVY PHOTO 7155 SETUP
- The HP Envy Photo 7155 printer is best suitable for printing good quality photos at a very reasonable price. It's very compact and compatible so it saves more space. Also suitable for both home and office use. Also it consists of many advanced techniques like wireless connection etc. Follow the below steps for HP Envy Photo 7155 setup.
HP ENVY PHOTO 7155 HARDWARE SETUP STEPS
- First, unbox the printer box and make sure the printer components are provided in it.
- Then, take the Envy printer from the box and keep it on a flat surface. Take off the blue-colored tapes from the printer. Also, remove the packing materials.
- After that, unpack the power cord provided in the printer box and link the cable to the respective port of the printer and power socket.
- Then, power up the Envy printer by pressing its power button for a couple of seconds. Configure the preferences on the control panel of the printer. Lift the top access door.
- Unpack the ink cartridges enclosed with the printer package.
- Peel off the tapes on the cartridges.
- Insert the cartridges into the corresponding slots.
- Load the input tray with suitable papers.
- Arrange the cartridges utilizing the alignment sheet.
- Finally, install the printer software on your computer to complete the first time printer setup.
HOW TO DOWNLOAD AND INSTALL THE HP ENVY 7155 SOFTWARE?
- First, switch on HP Envy Photo 7155 Printer device and Windows computer.
- Visit the 123hp.com/setup site to download Envy Photo 7155 drivers.
- After that, type the Printer model name and select the next option, until you reach the Driver download page.
- Now, from the driver download page, choose the compatible HP Envy Photo 7155 Printer driver.
- Download and install the HP Envy Photo 7155 Printer driver with the help of the manual instructions.
HP ENVY PHOTO 7155 WIRELESS SETUP IN WINDOWS
-
PREPARE FOR INSTALLATION
● First, power on your printer and then place it in setup mode.
● Now, press ‘CANCEL’ and the ‘WIRELESS’ button to wake up the printer.
● Then, on the LCD display, navigate to wireless or network settings and select ‘Restore’ Network Settings.
● Your computer and the HP Envy Photo 7155 printer must be in connection to the same wireless network -
INSTALL THE PRINTER SOFTWARE
● First, open the web browser then go to the printer setup and click Download to save HP Easy start.
● After that, open the saved file and extract the software.
● When prompt display, select continue to make changes to your computer.
● If the HP Envy Photo 7155 wireless printer is not detected, select ‘MY PRINTER’ is not shown.
● Follow the instructions to get the software selection screen and select the software.
HP ENVY PHOTO 7155 WIRELESS SETUP IN MAC
-
PREPARE FOR INSTALLATION
● First, if the Envy Photo 7155 is connected to a wireless network, make sure it is a good internet connection.
● Now, the router and computer must be switched on.
● Printer should be ready with paper in the input tray and ink in the ink cartridge.
● Also disconnect the USB cables if any are connected to it.
● Finally, the printer must be ‘ON’.
● The router and the computer must be close to each other for better accessibility. -
RESTORE DEFAULT WIRELESS SETTINGS ON THE PRINTER
● First, wake the printer by pressing the power button for stability.
● Suppose the wireless light is not blinking, press the ‘Wireless’ and ‘cancel’ button simultaneously for a few seconds.
● Now, proceed by continuing to install the software.
● Using HP auto wireless Complete the software setup.
● Follow the below instruction given to install HP Envy Photo 7155 software and HP Envy Photo 7155 driver. -
INSTALL THE PRINTER SOFTWARE
● First, navigate to the setup page and click download and then open HP Easy Start.
● Then, click the Set Up My HP option and click Accept.
● After that, on the printer control panel, check for the light. Then, under the connect screen select your envy photo7155 printer and click
Continue.
● Now, type the required details and select the Join option.
● HP Easy Start requests access to the network and click Allow.
● Finally, click Add printer to create the queue to start printing.
HOW TO CONNECT HP ENVY PHOTO 7155 PRINTER TO WIFI?
- First make sure the printer, router, and computer are powered on and ready to configure the wireless HP Envy Photo 7155 Setup.
- After that, on the control panel of the printer, touch the Wireless icon.
- Select Settings --> Wireless Settings --> Wireless Setup Wizard.
- Now type the network name and password of the router to which you need to connect the devices.
- Then download and install the printer driver software of your HP Envy photo 7155 printer on your computer or laptop.
- Follow the instructions on the computer’s display and configure the connection type as wireless.
- Provide the network name and password to complete the wireless connection.
So follow the above mentioned steps for HP Envy Photo 7155 setup. We made it in
simple points for your easy understanding. We hope it was helpful for you. For any other
queries and doubts contact us.
