The hp laserjet pro mfp m28w/m29w is a very good quality printer or copier. Best suitable for small business and self-employed workers. Also it has a control panel more complete than that of the other laserjet series in this range. Follow the below mentioned steps for HP laserjet pro mfp m28w/m29w wireless setup.
First, remove the printer box by removing tapes and stickers.
Then, keep it on a flat surface to proceed.
Next, take off all the packaging material from the accessories.
Now unpack the printer accessories and finish the hardware installation process for the HP laserjet pro mfp m28w/m29w setup.
First, go to the official HP website to download the driver
Download the driver setup files according to your operating system from the HP website
Once the setup file is ready, start to run the file
After that, follow the on-screen instructions to complete the download
Now make sure to connect the USB cable to your HP Laserjet Pro m404n printer and your computer once instructed
Wait for a few seconds and make sure to connect your printer to your PC
Follow the on-screen instructions to complete the download
Enter all the details into the wizard and complete the installation process. Finally, print out a test page.
CONNECT THE POWER CORD TO HP LASERJET PRO MFP M28W/M29W PRINTER First, insert one end of the cord to the printer and the other end to the power socket. Then, verify the stable power connection. After that, switch on the printer after basic HP laserjet pro mfp m28w/m29w setup. Finally, wait for the printer to power on.
INSTALLATION OF INK CARTRIDGES
First, turn on your printer and open the access door. Then, clean the access area and
unwrap the new HP ink cartridges. Next, remove the plastic wrappings from the
cartridge and insert. Locate according to the color-coding and close the access door.
Finally, assign a print task and get b/w and color printouts easily.
LOAD PAPER ON TRAY FOR HP LASERJET PRO MFP M28W/M29W PRINTER
First, turn on your HP laserjet pro mfp m28w/m29w printer and lift the input paper tray. Then, clear all the paper clots and remove all the protective materials. Clean the print heads and stuff the printing sheets into them. Look for damaged edges of printing sheets and remove them. Finally, close the input paper tray and continue printing files at ease.
First, turn on the printer and go to the browser then search
123.hp.com/laserjetpromfpm28/29w. Then, pick the correct and latest software for the laserjet pro mfp m28w/m29w
printer from the shown list when you type the printer model number in the support
page. Finally, the Run option will help you with the installation of the driver on the
computer.
First, to prepare for installation, know your wireless network name and security keyword. Switch on the Wireless router and Windows computer.
After that, establish a connection between the Windows computer and wireless router, to which you have decided to connect your 123.hp.com/laserjetpromfpm28/29w Printer.
Then locate the HP laserjet pro mfp m28w/m29w Printer close to the Windows computer for easy access.
Also make sure the HP laserjet pro mfp m28w/m29w Printer is within the optimum range of the wireless router.
Then to connect to the wireless network in HP laserjet pro mfp m28w/m29w, visit the Printer device control panel.
Now choose the wireless wizard from the control panel. If the network name is available on the wireless wizard list, click on the network name.
If the network name is not available, then type your wireless network name and password and configure the wizard settings.
After adding the network name, follow the setup instructions for connecting to the wireless network.
To download and install the HP laserjet pro mfp m28w/m29w Printer software switch on the printer device and Windows computer.
After that, visit the HP site to download 123.hp.com’setup laserjet pro mfp m28w/m29w driver.
Type the Printer model name and give the next option, until you reach the Drive download page.
From the Driver download page, choose the compatible HP laserjet pro mfp m28w/m29w Printer driver.
Finally, download and install the HP envy pro 6400 Printer driver with the manual instructions.
First, to prepare for installation the router and computer must be switched on.
Printer should be ready with paper in the input tray and ink in the ink cartridge.
Also disconnect the USB cables if any are connected to it.
Finally, the printer must be ‘ON’.
The router and the computer must be close to each other for better accessibility.
To restore default wireless settings on the printer, wake the printer by pressing the power button for stability.
Suppose the wireless light is not blinking, press the ‘Wireless’ and ‘cancel’ button simultaneously for a few seconds.
Now, proceed by continuing to install the software.
Using HP auto wireless Complete the software setup.
To install the printer software navigate to the setup page and click download and then open HP Easy Start.
Then, click the Set Up My HP option and click Accept.
After that, on the printer control panel, check for the light. Then, under the connect screen select your HP laserjet pro mfp m28w/m29w printer and click Continue.
Now, type the required details and select the Join option.
HP Easy Start requests access to the network and click Allow.
Finally, click Add printer to create the queue to start printing.
First, power up the router and make sure the printer provides an active internet connection. Then, link the printer to the network of the router.
After that, the wireless connection between your HP laserjet pro mfp m28w/m29w Setup printer and computer is done using the HP Smart application.
You can get the app from the Microsoft Store for Windows OS and Apple Store for Mac devices.
Then, download and launch the HP Smart application.
Open the application and add your printer.
Now you can perform all the functions of the printer.
So follow the above mentioned steps for HP laserjet pro mfp m28w/m29w wireless
setup. We made it in simple points for your easy understanding. We hope it was helpful
for you. For any other queries and doubts contact us.