HP Officejet 4630 is an all in one printer with wireless connection technology. Also it has a great balance between the size and the paper capacity. This printer features innovative Ink Advantage technology, which helps consumers to print at an inexpensive price. You can print documents and photos from your smartphones and tablets. Follow the below steps for HP Officejet 4630 wireless setup.


First, make sure the purchased printer box is sealed properly.
 After that, unseal the printer box and check if the printer components are provided in it.
 Take the HP Officejet 4630 printer from the box and place it on a clean and flat surface.
 Then remove the packing tapes and protective materials from the printer.
 Load a stack of plain white papers into the input tray by adjusting the paper width guides.
 Now open the access door at the top.
 Unpack the new ink cartridges provided in the printer package and insert them into the corresponding slots.
 Finally, align the cartridges by printing an alignment sheet and complete the HP Officejet 4630 Setup.


First to download the HP printer driver, visit the official HP website on your computer.
 A search choice is shown on the Hp webpage, enter HP Officejet 4630 in your printer and press Enter to start downloading the driver.
 Once done, you will be redirected automatically to the HP Officejet printer website, which contains all queries for HP Officejet printers and resolution according to the model you have entered.
 On the tab, click on the “go” button, you will be able to see a query page; click “go” and begin the driver installation.
 The product Installation Program of the driver will be forwarded to the tab.

This page will contain printer details such as file size, release date, driver edition, etc.
 See if it is compliant and follows the version and space needed by your particular operating system, and starts installing the driver afterward.
 Finally the download options are presented, each of which is unique and different.


First, to prepare for installation, know your wireless network name and security keyword. Switch on the Wireless router and Windows computer.
 After that, establish a connection between the Windows computer and wireless router, to which you have decided to connect your 123.hp.com/officejet4630 Printer.
 Then locate the HP Officejet 4630 Printer close to the Windows computer for easy access.
 Also make sure the HP Officejet 4630 Printer is within the optimum range of the wireless router.
 Then to connect to the wireless network in HP Officejet 4630, visit the Printer device control panel.
 Now choose the wireless wizard from the control panel. If the network name is available on the wireless wizard list, click on the network name.
 If the network name is not available, then type your wireless network name and password and configure the wizard settings.
 After adding the network name, follow the setup instructions for connecting to the wireless network.
 To download and install the HP Officejet 4630 Printer software switch on the printer device and Windows computer.
 After that, visit the HP site to download 123.hp.com’setup Officejet 4630 driver.
 Type the Printer model name and give the next option, until you reach the Driver download page.
 From the Driver download page, choose the compatible HP Officejet 4630 Printer driver.
 Finally, download and install the HP Officejet 4630 Printer driver with the manual instructions.


First, to prepare for installation the router and computer must be switched on.
 Printer should be ready with paper in the input tray and ink in the ink cartridge.
 Also disconnect the USB cables if any are connected to it.
 Finally, the printer must be ‘ON’.
 The router and the computer must be close to each other for better accessibility.
 To restore default wireless settings on the printer, wake the printer by pressing the power button for stability.
 Suppose the wireless light is not blinking, press the ‘Wireless’ and ‘cancel’ button simultaneously for a few seconds.
 Now, proceed by continuing to install the software.
 Using HP auto wireless Complete the software setup.
 To install the printer software navigate to the setup page and click download and then open HP Easy Start.
 Then, click the Set Up My HP option and click Accept.
 After that, on the printer control panel, check for the light. Then, under the connect screen select your HP Officejet 4630 printer and click Continue.
 Now, type the required details and select the Join option.
 HP Easy Start requests access to the network and click Allow.
 Finally, click Add printer to create the queue to start printing.


First, go to the setup page and find your driver by entering the required details of the
hp com setup 4630 printer.
 Tap the download button there and open that once it finishes downloading.
 Double tap to launch the driver and now follow the instruction given.
 Get back to the setup page and finish the activation.
 No need to manually connect your Wireless connect setup printer as it auto
 Make sure you have an active and stable network connection setup.

So follow the above mentioned steps for HP Officejet 4630 printer wireless setup. We made it in simple points for your easy understanding. We hope it was helpful for you. For any other queries and doubts contact us.