HP OFFICEJET PRO 7740 WIRELESS SETUP
The HP Officejet Pro 7740 is an all-in-one printer with less complication. Also the connection type can be set to wireless while installing the software. Even supports mobile printing. By using Airprint you can connect from any Apple device easily. Follow the below steps for HP Officejet Pro 7740 setup.
HP OFFICEJET PRO 7740 HARDWARE SETUP STEPS
First, make sure the box is properly sealed then remove the printer from the box and place it on a flat surface. After that, insert one end of the cord to the printer and the other end to the power socket. Then, verify the stable power connection. After that, switch on the printer after basic HP Officejet Pro 7740 setup. Finally, wait for the printer to power on. Now turn on your printer and open the access door. Then, clean the access area and unwrap the new HP ink cartridges. Next, remove the plastic wrappings from the cartridge and insert. Locate according to the color-coding and close the access door. Finally, assign a print task and get b/w and color printouts easily. After that, lift the input paper tray. Then, clear all the paper clots and remove all the protective materials. Clean the print heads and stuff the printing sheets into them. Look for damaged edges of printing sheets and remove them. Finally, close the input paper tray and continue printing files at ease.
HP OFFICEJET PRO 7740 WIRELESS SETUP STEPS IN WINDOWS
First turn on your computer and the router. Then place the router and the printer closer within the range. Also make sure it is on. There will be a wireless option on your control panel. Then click on the settings option and go to the Wireless setup wizard option. After that pick a suitable network for connection and select the Enter new network name and proceed.
Finally, install the complete setup driver and 123.hp.com/setup 7740 software from the website page.
HP OFFICEJET PRO 7740 WIRELESS SETUP STEPS IN MAC
First, to prepare for installation the router and computer must be switched on. Printer should be ready with paper in the input tray and ink in the ink cartridge. Also disconnect the USB cables if any are connected to it. Finally, the printer must be ‘ON’. The router and the computer must be close to each other for better accessibility. To restore default wireless settings on the printer, wake the printer by pressing the power button for stability. Suppose the wireless light is not blinking, press the ‘Wireless’ and ‘cancel’ button simultaneously for a few seconds. Now, proceed by continuing to install the software. Using HP auto wireless Complete the software setup. To install the printer software navigate to the setup page and click download and then open HP Easy Start. Then, click the Set Up My HP option and click Accept. After that, on the printer control panel, check for the light. Then, under the connect screen select your HP Officejet Pro 7740 printer and click Continue. Now, type the required details and select the Join option. HP Easy Start requests access to the network and click Allow. Finally, click Add printer to create the queue to start printing.
So follow the above mentioned steps for HP Officejet Pro 7740 printer wireless setup.
We made it in simple points for your easy understanding. We hope it was helpful for
you. For any other queries and doubts contact us.
